Ready to learn how to make Easter bows for a wreath, that you can use it really on any Easter decoration? In this step-by-step tutorial, I will show you how to make three different styles of bows. When you are finished you will have some fabulous bows that will make all your Easter decor look AMAZING!
How To Make Easter Bows For Wreaths
Easter bows made with Easter themed ribbons really help add the finishing touch to any wreath you are making for Spring. Follow along as I teach you three separate bows recipes that would be perfect for any Spring wreath. These would also look great on swags, lanterns, or centerpieces. There are so many possibilities and options to brighten things up with a beautiful Easter bow!
We have so many adorable ribbon patterns to use and create for Easter. I love putting together a color theme with a couple of different textures. Like I did with the bright polka dot and striped pattern. We are embracing a lavender purple today and adding a fun butterfly pattern to this bow. If you are making these bows for wreaths for yourself or to sell, long tails are the best to use.
After making I like to curl the ends with my fingers to add some more whimsy and dimension. It’s also important to determine what pattern ribbon you’d like to pop on the front of your bow. I like to break up two patterns with a solid or glitter ribbon to let the main ribbon stand out. Make any adjustments you may need. You may need to mix and match patterns or add some extra loops to your layers as you go. You can also adjust the recipe to fit the project or wreath you are making a bow for. If you don’t make wreaths, there are so many ways to incorporate these bows into your everyday home décor. They make a perfect finishing touch on lanterns, frames, or anything else that needs a bright touch of color!
Print
Directions Bow #1 Purple polka dot, butterflies and stripes
- Grab the lavender and white polka dot ribbon on the back and measure a 20” tail. Twist into the center of your EZ Bowmaker. Make two 7” loops on each side. Trim another 20” tail at an opposite angle.
- Add the lavender butterfly ribbon and make a tail slightly shorter than the first layer. Make one 6 ½” loop on each side. Trim tails at an opposite angle.
- Bring in the purple striped ribbon and start with a tail slightly shorter than the butterfly. Make two 5 ½” loops on each side. Trim tails at an opposite angle.
- Run a cable tie just to the side of the center and hold it all together as you lift up from the Bow Maker. Don’t close the cable tie completely yet and fluff each loop. Add a second cable tie through the back then cinch it tight.
- Cut a 12” length of the lavender polka dot and cut in half width-wise. Fold itself over and tie around the center to cover the cable ties. Curl the tails up with your fingers.
Directions Bow #2 Unicorn, stripes, and white glitter ribbon
- Start with the pink, blue and purple stripes with a 20” tail. Make two 7” loops on each side. Trim the tails at opposite angles.
- Grab the white glitter and make an 18” tail. Make three 6 ½” loops on each side. Trim another 18” tail at an opposite angle.
- We’ll add the unicorn pattern with a tail slightly shorter and then make one 6” loop on each side. Trim the tails
- Make a bowtie in the center by cutting the length of the striped ribbon long enough for 4” loops on each side.
- Hold the bow all together as you take off the Bow Maker and run a cable tie around the center. Add a second cable tie in the back then cinch tight. Cut a 12” length of the white glitter ribbon and fold itself over and tie it around the center to cover the cable ties.
Directions Bow #3 purple polka dot and purple stripes ribbon
- Start with a 20” tail of the white and purple striped ribbon. Make two 6 ½” loops on each side. Trim the tails at opposite angles.
- Add the next layer of purple polka dot ribbon making 18” tails and one 6” loop on each side. Trim the tails.
- Grab the purple striped ribbon again and start with a slightly shorter tail and two 5” loops on each side. Spread them out as you go. Trim the tails at opposite angles.
- Run the cable tie around the center as you pull off your bow and close. Fluff each loop and run a second cable tie through the back. Cinch tight.
- Cut a 12” length of the lavender polka dot and cut in half width-wise. Fold itself over and tie around the center to cover the cable ties.
Tips For Making Easter Bows For Wreaths
Here are a few tips and tricks for making bows :
- Use an EZ Bow Maker if you have one available to you. I find it very helpful to use a Bow Maker when I’m making bows for wreaths or any other projects.
- Twist the ribbon each time you add any layers to the center dowels. This will help keep the good side of the ribbon facing the front.
- Spread the side loops out, like an “X” shape, and make sure you fluff each loop as you go.
- Staggering the lengths of your tails will help add more dimension and flair to your bow.
Are you searching for a unique DIY project this Halloween? Look no further than the Frankie Centerpiece Kit, perfect for adding a personalized and cute spooky touch to your Halloween decor. This DIY arrangement kit blends creativity with simplicity, making it an ideal craft for all skill levels.
DIY Frankie Centerpiece for Halloween Home Decor
Crafting your centerpiece is straightforward and enjoyable. You’ll need some basic tools like styrofoam, wire cutters, scissors, and hot glue. Begin by setting styrofoam inside the bucket, strategically place the twig sprays and, and use the eyeball picks for a finishing touch of flair.
Let me show you how to create your own DIY Frankenstein Halloween Centerpiece that is a cute not spooky decoration for Halloween. Mixing your spooky decorations with old and new gives you fun times spent crafting together now while reminiscing about the Halloweve of yester years. It’s a wonderful way to start a family tradition or simply enjoy some seasonal crafting magic.
Ingredients
Directions
- Start by finding cutting the styrofoam so it is nestled inside of the Green Frankenstein Bucket so that it sits nicely inside and glue down. I like to use both Gorilla Glue and Hot Glue to really secure it for both now and long term.
- Cut Black Garland Base into small sections and set your base, spreading for maximum coverage.
- Prep your picks by grabbing your Purple Green Orange Felt Ball Twig Sprays. Sseparating them into smaller picks. You can also twist the black chenille around your finger to create a fun effect.
- Trim your Glitter Eye Ball Picks and add to the stryofoam. Be sure to space them for the best visual display.
- Cut and prep the White Black Chenille Curly Stems add some dimension to them by curling with your fingers to really give them life.
- Stem back and look at your your centerpiece. Are thier bald or blank spaces? Fluff you black garland to fill and use the wires in your products from Keleas.com to really get the pieces where you want them.
- Grab one of your Glitter Curly Velvet Ball Picks and trim the stem down to a couple of inches. Fluff out your pick, and then place it to the left of your bow, tucking it behind the bow to have it peek out from behind it.
